Enigma Instructions Library for Every Model | PHLster (2024)

Get to know
our products.

Thank you for your purchase! Please choose your product below to get started.

PHLster product safety manual – a must read.

Enigma
Express

The Enigma Express is pre-assmbled and comes with our Skeleton holster (for specific gun models only – see fit list).

The Express faceplate has one big oval hole in the middle, and attaches to the holster with two screws. It’s made for a limited list of guns WITHOUT a light or laser attached. See the Express product page for specific fit information.

Fit List

  • G19/G26
  • G42
  • G43/43x/G43x MOS
  • G48/G48 MOS
  • Sig P365/P365X
  • P365XL
  • P365-XMacro (P365 Macro and Macro Variants are only compatible with the Macro Express)
  • P365-380
  • Springfield Hellcat
  • Hellcat Pro
  • Ruger LCR
  • S&W J-Frame (Does not fit the S&W Bodyguard 38)
  • Shield 1.0/2.0 – 3.1in
  • Shield Plus – 4in/3.1in
  • M&P 2.0 Compact 4in
  • Walther PDP-F 3.5in

NOTICE: Sig models with either factory or aftermarket metal frames are not compatible with the Enigma Express. Additionally, “Glock analog” pistols like P80 and Shadow Systems are not compatible with the Enigma Express.

Enigma Express – Light Bearing

The Light Bearing Enigma Express is pre-assmbled and comes with our Floodlight2 holster.

The Light Bearing Express has one large, irregular hole in the faceplate, and the holster attaches with four screws. It’s made for guns with either an X300 or TLR-1 weapon-mounted light.

Enigma OS – Standard

The Standard Enigma OS comes disassembled and does not come with a holster shell. It is for guns without a light or laser attached.

The Standard faceplate has two large round holes in the middle, and 6 small holes on each side. It attaches to the holster through the modwing, using two screws. It’s for guns WITHOUT a light or laser attached.

Enigma OS – Light Bearing

The Light Bearing Enigma OS comes disassembled and does not include a holster shell. It is for guns that have a light or laser attached.

The Light Bearing Enigma has two long, parallel slots in the faceplate. It attaches to the faceplate with four screws. It’s for guns with weapon mounted lights or lasers, as well as Tenicor brand holsters.

Download the PHLster holsters and accessories manual. This PDF document includes important safety information and instructions for PHLster belt-mounted holsters, clips, soft loops, wings, attachments, and a visual guide to IWB Floodlight adjustment.

  • Modular Wedge Kit
  • Floodlight2 - NEW
  • Floodlight1 IWB (Legacy)
  • Floodlight OWB
  • Pro Holster
  • City Special
  • Skeleton
  • Summit OWB
  • Retention Too Tight
  • ARC Switches - Modlite
  • ARC Switches - X300
  • Arc Switches - TLR1
  • Ascent Pouches
  • Comfort Tips - All Products

Modular Wedge Kit

Watch the instruction video to learn how to use the PHLster Modular Wedge Kit.

We also recommend watching thePoke and Check video and the Concealed Carry Comfort video, found here.

PHLster Floodlight2 IWB Adjustment Instructions

Learn to properly adjust your inside-the-waistband Floodlight2 holster. Do this first, before using it. If you are trying to troubleshoot a fitment or retention problem, reviewing this video should be your first step.

Important: Please be sure you are reholstering correctly, and testing IWB holster retention correctly.

For more instructions, details and helpful tips about the Floodlight2, see the full FL2 instructions page.

HAVING TROUBLE REHOLSTERING? Make sure to watch the video and read the full instructions page.

PHLster Floodlight1 (Legacy) IWB Adjustment Instructions

Learn to properly adjust your inside-the-waistband Floodlight holster. Do this first, before using it. If you are trying to troubleshoot a fitment or retention problem, reviewing this video should be your first step.

Important: Please be sure you are testing IWB holster retention correctly.

Click here for a full IWB Floodlight assembly video.

LEFT HANDED USERS

Click here for instructions on how to switch your Floodlight to a left handed configuration.

PHLster Floodlight OWB Adjustment Instructions

Learn to properly adjust your outside-the-waistband Floodlight holster. Do this first, before using it. If you are trying to troubleshoot a fitment or retention problem, reviewing this document should be your first step.

Click here for a full OWB Floodlight assembly video.

Download the Floodlight OWB Adjustment Instructions.

Pro Holster

Use the video playlist below to learn how to use the soft loops that come with your Pro holster, or how to install different belt clips. Left handed users: you can use the “complete assembly” when switching your holster from right to left handed.

Enigma Instructions Library for Every Model | PHLster (13)

City Special Retention Adjustment

To adjust the retention on your PHLster City Special revolver holster, simply loosen the screw and slide it towards or away from the trigger guard. Moving towards the trigger guard loosens the retention, and moving away from the trigger guard tightens it.

Important: Please be sure you are testing holster retention correctly.

For a full City Special holster assembly video, click here.

PHLster Skeleton

Here’s how to change the clip that comes with your Skeleton holster for a DCC Mod4 clip. This video can also be used to reassemble your Skeleton holster if you have taken it apart.

Summit OWB Holster Instructions

Here’s how to configure and adjust your PHLster Summit OWB holster.

IWB Holster Retention Too Tight?

The PHLster Skeleton and PHLster Pro Holsters have fixed retention, and are not adjustable by the user. If your holster retention feels too tight, please watch this video. Note that aftermarket parts and modifications, including frame or trigger guard stippling, can affect your holster’s retention feel.

Important: Please be sure you are testing holster retention correctly.

ARC Switches - Modlite

The Modlite PL350 comes with PHLster ARC switches. Use this instruction video to replace switches.

ARC Switches - X300

IMPORTANT: You install ARC switches at your own risk. GO SLOWLY, and do not force parts apart or together. Review ALL instruction material before starting.

There is some variation in the metal switch armatures in newer Surefire X300 lights. The factory switches may be difficult to remove, and the ARC switches may be difficult to install. If you encounter resistance, STOP before you break your light. Try the tricks in these videos:

If your factory switches are difficult to remove, watch this.

Hot water trick for getting the ARC switches on easily.

If you’re wondering why some switches are difficult, discussion here.

If you continue to encounter difficulty, STOP and contact PHLster customer support.

Arc Switches - TLR1

Use these instructions to learn how to install Arc Switches on a TLR1.

Download the instruction guide.

Enigma Instructions Library for Every Model | PHLster (16)

Ascent Pouches

Here’s how to use the PHLster Ascent pouches

Concealed Carry Comfort Tips

How to get comfortable with your concealed carry gun and holster. Technique tips, holster comfort mods, and carry position advice for ALL body types, including how to sit with an appendix carry holster. This is not just for PHLster holsters and not just for appendix carry – you can make any brand of IWB (inside the waistband) holster more comfortable by learning these skills.

Enigma Instructions Library for Every Model | PHLster (2024)

FAQs

Does tenicor work with Enigma? ›

This is an addendum to the Light Bearing Enigma OS instructions for installing Tenicor holsters. (Yes, Tenicor holsters are compatible with the Light Bearing Engima!) The instructions below are for attaching a Tenicor holster to the faceplate.

Which holsters are compatible with Enigma? ›

All new non-light-bearing IWB (inside the waistband) PHLster holster shells are compatible with the standard Enigma faceplate. Older PHLster IWB shells are also compatible, but may require the addition of a ModWing or a Dark Wing, if they don't already have one attached.

Is tenicor tuckable? ›

The clips are mounted toward the bottom of the holster, making it possible to tuck your shirt in.

How does the Enigma holster work? ›

How it works: Strong, thin, and flexible, the Enigma faceplate supports the holster and presses it into the body for low-profile concealment. Enigma was built to work with Concealment Mechanics for precise gun positioning. Carry anywhere on the front of the body, between about 2:00 and 10:00.

Can you change the holster on Enigma Express? ›

You can switch the holster on your Express with another PHLster Skeleton holster. We know that this can be a bit confusing, because both the Enigma OS models can be used with any compatible holster, but the Express can only be used with our Skeleton holster.

Is the Enigma Express comfortable? ›

I've worn the PHLster Enigma Express more than I haven't worn it and I am impressed with how comfortable it is to wear. Between grocery shopping, walking the dog, shopping, and going out to dinner, I never raced home to take it off, as I've done with other holsters. I don't mind wearing it on a regular basis.

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Horacio Brakus JD

Last Updated:

Views: 6527

Rating: 4 / 5 (51 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Horacio Brakus JD

Birthday: 1999-08-21

Address: Apt. 524 43384 Minnie Prairie, South Edda, MA 62804

Phone: +5931039998219

Job: Sales Strategist

Hobby: Sculling, Kitesurfing, Orienteering, Painting, Computer programming, Creative writing, Scuba diving

Introduction: My name is Horacio Brakus JD, I am a lively, splendid, jolly, vivacious, vast, cheerful, agreeable person who loves writing and wants to share my knowledge and understanding with you.